
Signs Your Home Is Ready for a Repipe
A single leak is a repair. A pattern is a system telling you the pipes themselves have failed. If you recognize more than one of these, a repipe is almost always the cheaper path than another year of spot fixes:
- Rusty, cloudy, or metallic-tasting water, especially first thing in the morning
- Water pressure that has slowly dropped across the whole house, not just one faucet
- Pinhole leaks that keep showing up in different spots
- Galvanized steel or polybutylene pipe, both of which fail from the inside out
- Pipes that are 40 or more years old and have never been replaced
- Hot water that takes a long time to arrive and never runs truly hot
Galvanized and polybutylene are the two materials we replace most often in Sacramento County homes. Both corrode or degrade internally long before the damage is visible on the wall.
PEX vs. Copper: How We Help You Choose
Both are proven materials, and we install both. Here is how they compare. For the full picture on metal pipe, see our copper repiping page.
PEX
Copper
For homeowners who plan to stay for the long run, copper is our first recommendation: the longest service life and rigid metal pipe throughout the house. PEX is the right call when the budget is tighter or the layout makes rigid pipe hard to route. During the assessment we show you both options for your home and price them side by side.

Whole-House or Partial: What Gets Replaced
A repipe replaces the pressurized supply lines that carry fresh water to every fixture in your home: sinks, showers, tubs, toilets, the water heater, laundry, and outdoor spigots. It does not touch drain or sewer lines, which are a separate system on a separate quote.
Most projects are whole-house, replacing every supply run at once so you never revisit the same walls twice. Partial repipes are possible when only part of the system has failed, for example, the original galvanized lines in an older wing while a newer addition stays in place. During the free assessment we walk the home, locate every run, and tell you honestly which approach makes sense for your condition and budget.
Why 5-Star
Why Homeowners Choose 5-Star for Repiping
In-House Licensed Technicians
Upfront Flat-Rate Pricing
Expert Permit Management
1-Year Labor Warranty
PEX Repiping Questions, Answered
- How long does a whole-house repipe take?
Most single-family homes are done in two to three days. We restore water each evening so your household is never left without it overnight.
- Can my family stay in the home during the repipe?
Yes. We work one area at a time and keep at least one bathroom functional. Some families prefer to be out during the busiest day, but it is a preference, not a requirement.
- Will repiping improve my water pressure?
In most cases, noticeably. Old corroded lines lose flow capacity as buildup narrows them from the inside. Fresh full-diameter pipe restores strong, even pressure throughout the house.
- Do you replace drain and sewer lines during a repipe?
No. A repipe covers water supply lines only. Drain and sewer work is a separate system with different materials, and we quote it separately if you need it.
- Is PEX approved under California plumbing code?
Yes. PEX has been recognized in the California Plumbing Code since 2009 and is used in new construction across the state. Every repipe we complete is permitted and passes inspection under our license.
- Does PEX affect the taste or safety of my water?
No. Certified PEX is manufactured for potable water and carries NSF certification. Any faint taste from a brand-new pipe clears within a few days of normal use.
- What happens to the walls where you access the pipes?
We plan runs to keep access openings small and as few as possible. We close and patch the openings we make. The exact scope of wall finishing is spelled out in your written estimate before work begins, so there are no surprises.





